In this article, we are going to introduce the features and application of the two-piece hanger fastener. Stay with us.
Fasteners and metal holders include various types of tools that are widely used in the construction industry. Metal fasteners keep one or more objects in a certain position and prevent the movement of these objects, their deviation and vibration. and copper, zinc and galvanized steel.
Application and material of metal fasteners
Metal fasteners are produced and designed in many industries for all types of special connections, with various types and variety in material, size, strength and application for all special conditions and are available in the market. In general, the metal fastener has high strength and is usually made of stainless steel, copper, aluminum, galvanized sheet, etc.
Experiments were conducted to use fasteners in environments that are exposed to high wear and corrosion and to determine their characteristics. For example, fasteners made of stainless steel with A4 grade are very resistant to corrosion, erosion and decay. Also, these fasteners are widely used due to their high coordination and diversity with international standards when replacing worn out equipment and rebuilding.
Two-piece metal hanger
As it is clear from the name of this product, it has two main parts, one part is placed around the pipe and the other part is placed as a pendant on its upper part. The pipes can be kept horizontally on the roof or at other heights so that the pipes do not put pressure on the roof and they can handle all types of fluids well.
Features and application of two-piece metal hanger fastener
The application of two-piece hanging package
Usually, two-piece hanging fasteners are made of S304 and S316 stainless steel sheets or A283-Gr.C, A516 alloy sheets. A hot or cold galvanized, dichromate or Teflon coating is applied to resist impact and pressure and corrosion. In addition, depending on where the hand is going to be used, an insulating cover made of neoprene, rubber, EPDM or PVC is placed on it.
This type of fastener is used for fire extinguishing pipelines that are stretched in the roof or heating systems. The two-piece hanger can be used to hold all kinds of metal pipes, plastic pipes or cables. The point here is that these pipes should be stretched horizontally under the roof so that the longitudinal part of the curved areas in the middle of the bracket can restrain them well and prevent the rods from falling or increasing the load on the roof of the building.
The two-piece metal hanger is one of the most widely used, cheapest and most consumed products in the market. Two-piece hanging metal fastener with different coatings of CS-ST37 iron sheet, electrostatic color (black, gray, yellow) with a 16 cm hanging rod and bolts and nuts on the sides, depending on whether it is used with insulation coating or without coating Insulation is available in the market.
Specifications of the two-piece hanger
It is available for the installation of pipes from 11.2 to 12 inches, i.e. 50 to 315 mm, and it is produced from sheet with a thickness of 3 and 4 mm and a width of 34 mm.
It is for hanging pipes in horizontal lines and under ceilings.
The length of the hanging rod with two threaded ends for the pendant is 16 cm.
The dimensions of the bar are M 12 x 60.
It is available in M 12 x 30 and M 12 x 40 sizes according to the bolts and nuts of the sides and the size of the fastener.
The reason for the popularity of the two-piece metal pendant fastener
Fastener with two metal pieces, size 5 inches
The use of two-piece metal hanging fastener, since it has anti-corrosion and anti-rust properties, protects the pipe from vibration and increases the life of the building’s piping. On the other hand, coated metal handles are used in situations where the pipes are not insulated and are in a suspended state.
So, before buying, be sure to pay attention to the fact that you need to determine the place you want to use the fastener, and according to that, prepare a special metal fastener. In addition to all these things, we must state that basically all engineers who work in the construction industry know the types of retainers and fasteners. But for ordinary people, choosing the right type of fastener will certainly be a difficult and sensitive matter. Therefore, engineers are more inclined to use this type of fasteners.
A two-piece metal hanger is one of the tools used to hold objects firmly. It has different types and they are used especially in the construction industry. Because they have many different uses, they should be protected from rusting. Due to the different types and shapes, they have different shapes. We suggest that you refer to Best Parsian’s site in the field of purchasing two-piece metal hanging fasteners, after receiving the necessary information and advice, proceed to purchase the desired product.
In this article, we tried to introduce the features and application of two-piece metal hanger fasteners. Thanks for your cooperation.